Air Conditioning Repair in Shoreline, WA

This common issue can have several root causes:

• Low Refrigerant Levels: Often due to a leak, this reduces the system’s ability to absorb and transfer heat.
• Dirty Evaporator Coils: A buildup of dust and grime limits heat exchange.
• Frozen Coils: Caused by poor airflow or low refrigerant, this stops the system from cooling properly.
• Faulty Compressor: Without a working compressor, your unit can’t move refrigerant through the system.
• Leaky Ductwork: Cool air may be escaping into unused parts of your home.

Our team performs refrigerant checks, coil inspections, compressor tests, and airflow evaluations to determine the problem and provide a fix.

Short cycling is when your AC turns on and off rapidly without completing a full cooling cycle. This strains your system, increases wear, and raises energy bills.

Common causes include:

• Incorrect system sizing
• Dirty air filters or coils
• Refrigerant imbalances
• Malfunctioning thermostats
• Overheating components

We’ll assess your system from top to bottom to restore normal cycling and extend your AC unit’s life.

Your AC unit should never sound like a drumline or a haunted house. Strange noises often signal that something inside your system is loose, worn, or beginning to fail. Catching the problem early can save you from expensive repairs or full system breakdowns.

Some of the noises you may encounter, and their causes, are:

• Buzzing: Electrical issues or failing capacitors
• Banging/Clanking: Loose or broken internal parts
• Squealing: Worn motor bearings or belt issues
• Clicking: Malfunctioning relays or debris in the fan

Unusual noises almost always mean something’s wrong. Ignoring them can lead to larger, more expensive repairs. We identify the source and resolve the issue before it becomes a bigger problem.

While most AC repairs are best left to the pros, there are a few simple steps Shoreline homeowners can take before calling for service. These troubleshooting tips can sometimes resolve minor issues or at least help you rule out the obvious.

Check the Thermostat Settings

Make sure your thermostat is set to “cool” and the temperature is lower than the current room temp. Dead batteries or incorrect mode settings are common culprits, especially after a power outage or seasonal switch.

Replace or Clean the Air Filter

A clogged air filter restricts airflow and can lead to system shutdowns, frozen coils, and poor performance. If your filter looks gray, dusty, or clogged, replace it with a fresh one and check again in a month.

Clear the Outdoor Unit

Leaves, branches, and debris can block airflow around your condenser, reducing cooling capacity. Turn off power to the unit, then gently clear away anything within two feet of the system and rinse the fins with a garden hose on low pressure.

Check the Breaker Box

Sometimes, a tripped breaker is the only thing stopping your AC from running. Check your electrical panel for any flipped breakers. If it continues to trip, call us immediately—there may be a deeper electrical issue at play.

Inspect the Vents and Ductwork

Ensure all vents are open and unblocked by furniture or rugs. If you notice weak airflow in one room, there may be a duct leak or disconnected section that needs professional attention.

These DIY steps are safe for homeowners to try and may save you a service call. But if the problem persists or you’re unsure, it’s always better to call in a trained HVAC technician.

Cooling your home shouldn’t mean draining your wallet. There are several simple and effective ways to cut down on energy use without sacrificing comfort, and most of them start with your AC system. These are:

• Change filters monthly
• Seal and insulate ductwork
• Install a smart thermostat
• Schedule annual tune-ups
• Upgrade to a high-SEER AC system

We can evaluate your current setup and suggest energy-efficient upgrades that reduce your energy bills and improve comfort.

Leaking water usually signals a clogged condensate drain, frozen coils, or a cracked drain pan. If ignored, it can lead to mold, water damage, and electrical issues. We’ll inspect the drainage system, clear any blockages, and replace damaged parts to ensure your unit drains properly.

If your system is over 12 years old, breaks down frequently, or needs major repairs, replacement may be more cost-effective. Today’s energy-efficient models offer better comfort, lower energy bills, and newer features like variable speed compressors. We’ll provide side-by-side comparisons to help you decide what’s best for your home and budget.

Absolutely. A dirty or malfunctioning AC can circulate dust, mold spores, and bacteria. We offer indoor air quality solutions such as advanced filtration, UV lights, and duct cleaning services. Clean systems not only cool better but also create a healthier living space.

BelRed offers 24/7 emergency service. Whether it’s early morning or late at night, we prioritize urgent cooling issues. Our dispatch team coordinates quickly, and our fully stocked service vehicles help us complete most repairs on the first visit.